Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical".

ELECTRONIC VIEWFINDER (EVF)

Setthe viewfinder to the position shown in the figure when carrying the camcorder or storing it in the carrying case.

Turnthe viewfinder to the position shown below when shooting pictures. 1. Turn the viewfinder.

2. Turn the eyepiece.

Youcan adjust the position and angle of the viewfinder so you can see through it easily.

CAUTIONS:

• Do not force the viewfinder to rotate completely around. This will damage the viewfinder and/or camcorder.

• When pulling the viewfinder out or returning it to its original position, hold the viewfinder by the swivel section.