
General Maintenance
PLAYBACK OF PRE-RECORDED CASSETTE
Symptom | Check Point & Correction |
|
|
The PLAY button cannot be engaged. | • Set the CAM/OFF/VIDEO switch to VIDEO. |
|
|
No picture appears on television screen when The | • Set the television to the camcorder channel (3 or 4) |
PLAY is pressed. (TV is connected to the camcorder | depending upon the selected channel in the RF channel |
by using RF converter unit.) | select switch of RF converter unit. |
|
|
Interference on playback picture. (TV is connected | • When you see the playback picture on your TV, adjust fine |
to the camcorder by using RF converter unit.) | tuning knob on television set to obtain best picture. |
|
|
Picture bends at the top of the TV screen. | • TV receiver is older type. It needs to be modified to work |
| properly with camcorder. |
| • Tape is damaged. Try another cassette. |
|
|
Color of your TV screen is too bright, too faint or | • TV set has VIR circuit. Turn it off during playback. |
change. |
|
|
|
Date search function does not operate. | • Slide the CAM/OFF VIDEO switch to VIDEO. |
| • Insert the clock battery, set the date and time, then start |
| recording. |
| • Do not remove the clock battery after recording. |
| • Do not eject the recorded cassette. Leave it in the |
| camcorder. |
|
|
BATTERY CONDITION
Symptom | Check Point & Correction |
|
|
The ( ) indication in the electronic viewfinder or on | • Try another battery or charge the battery. |
the LCD monitor flashes to indicate battery is |
|
discharged. |
|
|
|
The battery level indicator ( ) appears differently on | • This does not indicate a fault; it is because the power |
the LCD monitor and in the viewfinder. | consumed by the LCD monitor and the viewfinder is |
| different. |
|
|
NO OPERATION IS ACCEPTED
Symptom | Check Point & Correction |
|
|
Power is turned on, but no | • Remove the power source and the clock battery. And after about one minute, |
button operations are | the display in the viewfinder or on the LCD monitor will be reset. Then set the |
accepted. | information again. |
|
|
TAPE DISPLAY
Symptom | Check Point & Correction |
|
|
"TAPE" appears in the | • Have you moved the camcorder or cassette from a cold place to a warm place so that |
viewfinder or on the | its temperature changed abruptly? If the temperature has changed, remove the |
62