MAKING A SAMPLE CAMERA RECORDING

MAKING A SAMPLE CAMERA RECORDING

1.Connect the POWER SOURCE. (See pages 11 and 12.)

2.Slide "EJECT" switch and insert tha cassette so the transparent window is toward you and the arrow toward the cassette holder. Slide the cassette into cassette holder as far as it will go.

NOTE: If the power source is not connected to the camera/recorder, the cassette holder will not open.

3. Press the cassette holder. The holder will latch in the operating position.

4.Set the " " switch to "AUTO".

5.Slide the power switch to "CAMERA". The camera/recorder will enter record/pause mode automatically.

NOTES:

•If the red record-protect tab on the cassette is closed, the "TAPE" indication in the viewfinder flashes for several seconds and the camera/recorder will not enter the record/pause mode.

•See page 31 for "EYEPIECE ADJUSTMENT".

6.Now, press the Start/Stop button to start shooting the picture. "REC" indication appears in the viewfinder. You are now recording the picture you see through the viewfinder.

7.Press the Start/Stop button to stop recording. Press the button again to resume recording. The "PAUSE" indication appears in the viewfinder instead of "REC" in the record/pause (stand-by) mode.

29