MAKING A SAMPLE CAMERA RECORDING

NOTES:

•The "TAPE END" indication in the viewfinder starts flashing when there is less than about three minutes recording time lef ton the cassette.

•If the record/pause mode continues for more than 5 minutes, the camera/recorder's power is automatically turned off. To turn on again, press the Start/Stop button. The camera/recorder enters record/pause (stand-by) mode.

8.After recording, slide the power switch to "VIDEO", and the camera/recorder will now be in the stop mode.

9.Press "REW" button. The tape will be rewound to the beginning.

10.Press "PLAY" button. The picture you just recorded will be seen through the viewfinder.

NOTE: If you connect the camera/recorder to your TV, you can see the picture played back on your TV. Refer to "VIEWING THE PICTURE PLAYED BACK ON YOUR TV" on page 37.

11. After playing, press "STOP" button.

12. Slide the power switch to "OFF" and then slide "EJECT" switch to remove cassette.

30