Hitachi VM-H620A, VM-H720A TAPE DISPLAY, Specifications, General Specifications

General Maintenance	- 59 -
operations are accepted.	date/title battery. And after about one
	minute, the display in the viewfinder will
	be reset. Then set the information
	again.
The camcorder does not operate when	Check that the polarities (+, -) of the
alkaline batteries are inserted.	batteries are correct.
	Insert six batteries.
TAPE DISPLAY
Symptom	Check Point & Correction
Tape appears in the viewfinder.	Have you moved the camcorder or
	cassette from a cold place to a warm
	place so that its temperature changed
	abruptly? If the temperature has
	changed, remove the cassette and set
	the CAM/OFF/VIDEO switch to OFF,
	then wait for about one hour.
	Remove the cassette and then try to
	reinsert, remove it several times. IF
	the indication is still shown in the
	viewfinder, use a cleaning tape to clean
	the heads and replace the cassette.

Specifications

General Specifications

Power requirements	6V DC
Power consumption	VM-H620A: 5.3W (when recording)
	VM-H720A: 5.9W (when recording)
Dimensions	3-11/16" W x 4-3/4" H x 8-5/16" D (94mm x 120mm x 211mm)
Weight	VM-H620A: 1.91 lbs (approx. 870g) without battery pack, lens
hood, lens	cap or cassette
	VM-H720A: 1.89 lbs (approx. 860g) without battery pack, lens
hood, lens	cap or cassette
Operating temperature	32°F ~ 104°F (0°C ~ 40°C)
Storage temperature	-4°F ~ 140°F (-20°C ~ 60°C)