Hitachi VT-F382A owner manual Basic Operations VCR Plus + Recording

Basic Operations (VCR Plus + Recording)

the codes.

Try entering all code numbers (00 - 52). Press CLEAR on remote to change incorrect entries.

If none of the codes work, press GUIDE several times to quit. The

VCR will not control your cable box. However, the output channel of the cable box has been set. Turn on the cable box and leave it tuned

to the channel you want to record some time before the recording is to begin.

Using VCR Plus+ to Record a Program

Now that your channels are set up, you can take advantage of this quick and easy method of delayed recording. You will use the on-screen Easy Guide System, following the basic procedure for delayed recording outlined on page 37. See the section on Recording a Program for recording tips and programming priorities.

You set up the delayed recording using the on-screen Easy Guide System.

1.Press GUIDE, then press 1 to select VCR PLUS RECORDING and bring up this screen:

2.Use the number buttons to enter the PlusCode of the program you want to record. This code can be up to eight digits. If you enter a wrong digit, press CLEAR and enter the correct one.

3.If you accidentally enter a nonexistent PlusCode, the VCR gives you an error message that disappears from the screen in about 10 seconds.

4.If you have entered the correct PlusCode, press GUIDE to store the PlusCode in the VCR's memory. This brings up another screen: