Getting Started (Initial SetuP)
are <HIFI> and <LINEAR>.
5 STEREO/MONO
Press 5 to control how the audio signal is recorded and sent to the TV.
Options are <STEREO> and <MONO>.
6 SAP
Press 6 when you are ready to record a second audio program. Options
are <OFF> and <ON>.
7 CABLE BOX SET
Press 7 to set up your cable box if you receive all channels through a
cable box.
8 AUTO CHANNEL SET
Press 8 to automatically program the VCR to receive all the channels that
come in on your antenna or cable.
9 ADD/ERASE CHANNEL
Press 9 to bring up a screen that lets you add new channels or limit the
channels to the ones you most often watch.
Note: option 7 CABLE BOX SET isnot enabled unless cATv 1 or CATV2
has been SeleCted in option 1 CHANNEL settingl
Setting the Clock
This is easy to do and important for your later timed recordings.
You'll need to set the clock when first hooking up your VCR, and any time
the power goes out more than 1 hour.
When you first plug in the VCR or after a power outage, the clock display
will read "--:--".
To set the clock, press GUIDE, then press 6 to bring up the Clock Set
screen:
Press the number buttons on the remote control to set the current time -
two digits for the hour and two for the minutes. Then press 1 or 2 for AM
or PM, respectively.
For example, if it is now 2:15 PM, press 0, 2, 1, and 5 for hours and
minutes, and press 2 for PM.
Continue pressing buttons to set the date. For example, if today is July 8,
1995, press 0, 7, 0, 8, 9, and 5 to get 07/08/95.
When you're done, press GUIDE twice to return to regular viewing.
If the SETUP VCR PLUS message continues flashing, set VCR Plus+
channels referring to the procedure in "Matching Broadcast CH numbers
to VCR Plus+ channels" on page 43. You may set the VCR Plus+
channels after you are familiar with your VCR.
Tips:
The item to be changed will blink on the screen as you go.