Getting Started | (Initial Setup) |
<CATV2>: | Alternate cable (if <CATVI> doesn't give you the channels you |
expect). |
|
3.Press 2 to select "2 AUTO CHANNEL SET". The tuner automatically cycles through all available channels in your area and place them in memory. This takes
For convenience, the TV channel numbers should match those programmed into the VCR. If your TV has automatic channel programming, set it on the same
Once channels are preset, you can use the up and down CHANNEL buttons to move through the active channels. Or you can press the number buttons to move quickly between channels that are far apart.
Removing Channels
You may not want to keep all the stations the
Erased channels cannot be selected by the up and down CHANNEL buttons but can still be selected by using the numbered buttons 0 to 9 and 100/ENT.
Adding Channels
Occasionally the
was "off the air" at the time of programming. Or you may change your mind about a channel you removed from memory.
To Add or Erase Channels
Press GUIDE, then press 4 to bring up the CHANNEL PRESET screen. Item 3 lets you add or delete channels. Use the number buttons to enter the channel you want to change, then press STOP to delete it or press PLAY to add it.
Setting Up Your VCR for Each Function Using the Menu Screen
Press GUIDE, then press 2 to bring up the VCR SETUP screen.
The screen shows the default settings on your VCR. The default settings are the ones that are preset at the factory.
23
