PREPARATION FOR USE

•If "TUNER SET UP" appears on the TV screen again, check the cable connections. Then, press MENU, F.FWD/ or REW/ button once again. The VCR will begin preset again.

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using CHANNEL (CH) or button or directly pressing number buttons on the remote control.

Note for using number buttons:

•When selecting cable channels which are higher than 99, press +100 button first, then press the last two digits. (To select channel 125, first press "+100" button then press "2" and "5").

•You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).

CLOCK SET UP

Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station as your time source.

In the example below, the clock is to be set to:

DATEMarch 1st, 1997

SETTING TIME 5:40PM

•Use the remote control for this procedure.

•When in the Menu mode the following buttons only work (PLAY/, F.FWD/, REW/, STOP/ , RESET/EXIT, POWER and MENU).VCR power must be turned on.

•The "PWR." and the "VCR" indicator must appear on the VCR's digital display.

•Turn on the TV and set the TV to channel 3 or 4. Now set CH3/CH4 switch on the back of the VCR to match the channel selected on the TV.

FOLIOHG2

<IMG SRC="ObjE55.BMP">

1 Select "SETTING CLOCK"

Press MENU button. The SETTING CLOCK menu appears.

SETTING CLOCK

MONTH DAY

YEAR

- -

/ - -

- - - -

HOUR MINUTE

AM/PM

- -

: - -

- -

•The number buttons on the remote control do not work in this Menu mode.

•When you press F.FWD/ button during steps [2] to [6], you may forward to next step.

•Press REW/ button to go back one step from current step during steps [3] to [7].

2 Select the month

Press /PLAY or

/STOP button repeatedly until your desired month appears. (Example: March → 03)

Then, press F.FWD/ button.

18