TIMER RECORDING

CHANNEL

16

REC SPEED

- -

•Remember refer to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 if you have a cable box or satellite box before setting the channel number.

10 Set the tape speed

Press /PLAY or /STOP button repeatedly until your desired tape speed appears. (Example: SP)

ONE TIME PROGRAM

DATE

05

/ 06

WED

START TIME

07

: 30

PM

END TIME

08

: 30

PM

CHANNEL

16

 

 

REC SPEED

SP

 

 

→

SP

 

LP

 

SLP

 

11 Finish setting the program

Press F.FWD/ button. Program 1 is now completed.

•To set another program, repeat steps [2] to [11].

•Press RESET/EXIT button to return to original mode.

12 Set the timer

Press POWER button. The "þ" indicator appears on the VCR's digital display.

• Please see "HINTS FOR TIMER RECORDING" on page 24 for more information.

HINTS FOR TIMER RECORDING

•If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings are lost.

•If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR power will be turned off. The "þ" indicator will flash.

•If a tape is not inserted or the erase-protection tab is removed, the "þ" indicator flashes and timer recording cannot occur. Please insert a recordable tape.

•The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the timer-record mode.

CORRECTING AN AUTOMATIC TIMER PROGRAM

1)Turn the power on.

2)Repeat steps [1] to [3] on page 22.

3)Go to the digit you want to change using the F.FWD/ button or REW/ button.

4)Enter correct numbers using /PLAY or /STOP button.

4)Press RESET/EXIT button to return to original mode.

5)Press the POWER button to return to timer stand-by mode.

STOPPING A STARTED AN AUTOMATIC TIMER PROGRAM

35