Manuals / Brands / TV and Video / VCR / Hitachi / TV and Video / VCR

Hitachi VTMX-231A SKIPPING UNWANTED SCENES DURING RECORDING, RECORDING ONE PROGRAM AND VIEWING ANOTHER, TO MONITOR THE PROGRESS OF YOUR RECORDING

1 43

Download 43 pages, 484.67 Kb

RECORDING

SP

NOTE: If any menu is activated on the TV screen, the REC button on the remote control does not function. Press RESET/EXIT button to clear the menu. Then, press REC button.

4 Stop recording

Press STOP button when recording is completed.

SKIPPING UNWANTED SCENES DURING RECORDING

Press PAUSE button to temporarily stop recording.

Press PAUSE or REC button to resume recording.

PAUSE

NOTE: When the VCR is in the Pause mode, you may view the time remaining with n marks on the TV screen. Each n mark represents one minute. After five minutes, the VCR will automatically switch to the Stop mode to prevent tape damage. When there is 1 minute remaining, one n will flash.

RECORDING ONE PROGRAM AND VIEWING ANOTHER

You can record one program while viewing another. To start recording, follow steps [1] to [3] under "VIEWING AND RECORDING THE SAME PROGRAM".

To select the channel you want to view at the TV, follow the steps below.

NOTE: If you have a cable box or satellite box connected to this VCR, please refer to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 before proceeding to the next step.

4 Select the TV mode

Press VCR/TV button on the remote control so that the "VCR" indicator on the VCR's digital display disappears.

5 Select the channel on the TV

Set the TV to the channel you want to watch.

TO MONITOR THE PROGRESS OF YOUR RECORDING

1 Select the VCR mode

Press VCR/TV button on the remote control so that the "VCR" indicator appears on the display.

2 Select channel 3 or 4 on the TV

Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV.

29

Contents

Using these quality features: HITACHI HOME HITACHI SALES HITACHI (HSC) ELECTRONICS TABLE OF CONTENTS WARNING: CAUTION: The caution marking is located on the rear of the cabinet IMPORTANT SAFEGUARDS Servicing Damage Requiring Service Replacement Parts LOCATION POWER SUPPLY AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE WARNING Page FEATURES VIDEO CASSETTE TAPE INFORMATION PRECAUTIONS THREE DIFFERENT TAPE SPEEDS INSERTING A CASSETTE REMOVING A CASSETTE ERASE PREVENTION Page OPERATING CONTROLS AND FUNCTIONS RENTAL SELECTOR button AUTO REPEAT button CLOCK/COUNTER button COUNTER MEMORY button COUNTER RESET button ANTENNA/CABLE CONNECTIONS Satellite systems: Fig. 5: RECORDING HINT: Fig. 6: Note to the CATV system installer SETTING THE CH3/CH4 SWITCH CONNECTING TO INPUT JACKS INPUT SELECT A/V TERMINALS INSTALLING THE BATTERIES CHANNEL SET UP (Automatic) • Use the remote control for this procedure NOTE: TO SELECT A DESIRED CHANNEL CLOCK SET UP Page TO CHANGE CLOCK SETTING TO DELETE OR ADD CHANNELS CHANNEL SET UP AGAIN SELECTING THE LANGUAGE PLAYBACK NORMAL PLAYBACK PICTURE SEARCH STILL PICTURE NOISE CANCEL (in the Still mode) VERTICAL HOLD CONTROL TRACKING ADJUSTMENT COUNTER MEMORY TO EXIT THE COUNTER MEMORY AUTO REPEAT PLAYBACK TO EXIT THE AUTO REPEAT MODE RENTAL PLAYBACK TO EXIT THE RENTAL PLAY MODE RECORDING VIEWING AND RECORDING THE SAME PROGRAM SKIPPING UNWANTED SCENES DURING RECORDING RECORDING ONE PROGRAM AND VIEWING ANOTHER TO MONITOR THE PROGRESS OF YOUR RECORDING IRT (Instant Timer Recording) TIMER RECORDING AUTOMATIC TIMER RECORDING For once recording: For daily recording: For weekly recording: Page Page HINTS FOR TIMER RECORDING CORRECTING AN AUTOMATIC TIMER PROGRAM STOPPING A STARTED AN AUTOMATIC TIMER PROGRAM CANCELING OR CHECKING THE START/END TIME AUTO RETURN WATCH THE RECORDED PROGRAM COPYING A VIDEO TAPE TO MONITOR THE RECORDING ON SCREEN DISPLAY DIGITAL DISPLAY SPECIAL FEATURES TROUBLESHOOTING GUIDE MAINTENANCE SERVICING CABINET CLEANING HEAD CLEANING TECHNICAL SPECIFICATIONS CABLE CHANNEL DESIGNATIONS