STANDARD ACCESSORIES

 

(1)

305 mm TCT Saw blade (mounted on tool) .............

1

(2)

Dust bag ......................................................................

1

(3)

17 mm Box wrench ....................................................

1

(4)

Vise Assembly ............................................................

1

(5)

4 mm Hex.bar wrench (only C12LCH/C12FCH) ........

1

(6)

Washer (C) ..................................................................

1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (SOLD SEPARATELY)

(1)Extension Holder and Stopper

(2)Crown molding Vise Ass'y (Include Crown molding Stopper (L))

(3)Crown molding Stopper (L)

(4)Crown molding Stopper (R)

Optional accessories are subject to change without notice.

APPLICATION

￿Cutting various types of aluminium sash and wood.

UNPACKING

￿Carefully unpack the power tool and all related items (standard accessories).

￿Check carefully to make certain all related items (standard accessories) are present.

PRIOR TO OPERATION

1.Power source

Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate.

2.Power switch

Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the trigger switch is in the ON position, the power tool will start operating immediately, inviting serious accident.

3.Extension cord

When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.

4.When the power tool is prepared for shipping, its

main parts are secured by a locking pin

Move the handle slightly so that the locking pin can be disengaged.

CAUTION

￿Set for transport

Lock the locking pin into the gear case (Fig. 1-a). Remove a 6 mm wing bolt.Turn the link (C) as the Fig. 1-b, and fix it again with the 6 mm wing bolt.

Lower guard cover the teeth of the blade to the front of the machine.

￿Cutting work

Move the handle slightly so that the locking pin can be disengaged.

Remove a 6 mm wing bolt.Turn the link (C) as Fig. 1-c, and fix it again with the 6 mm wing bolt.

Handle

Pull

Locking Pin

Fig. 1-a

Link (C)

6 mm Wing Bolt

Fig. 1-b

Link (C)

6 mm Wing Bolt

Fig. 1-c

5. Attach the dust bag to the main unit (Fig. 2)

(1)When the dust bag has become full of sawdust, dust will be blown out of the dust bag when the saw blade rotates. Check the dust bag periodically and empty it before it becomes full.

4