Hobart 3225DX manual Optional Auxiliary Power Receptacles, Gfci Receptacle Option

6-2. Optional Auxiliary Power Receptacles

1

2

5

3

5

4

5

YIf unit does not have GFCI re- ceptacles, use GFCI-pro- tected extension cord.

.Auxiliary power is not affected by weld output.

If a circuit breaker continues to open, contact Factory Autho- rized Service Agent.

GFCI Receptacle Option

1120 V 15 A AC GFCI Receptacle GFCI1

Auxiliary power output and circuit breaker protection is the same as standard receptacles (see Section 6-1).

If a ground fault is detected, GFCI Reset button pops out and receptacle does not work. Check for faulty tools plugged in receptacle. Press button to reset.

.At least once a month, run en- gine at weld/power speed and press test button to verify GFCI is working properly.

Australian, British, And South African Receptacle Options

2240 V 10 A AC Australian Re- ceptacle RC1

3240 Volt 13 A AC South African Receptacle RC1

4240 Volt 13 A AC British Receptacle RC1

RC1 supplies 60 Hz single-phase power at weld/power speed. Maxi- mum output from receptacle is 3 kVA/kW.

5 Circuit Breaker CB1

CB1 protects RC1 from overload. If CB1 opens, RC1 does not work. Press button to reset breaker.

Ref. ST-188 449 / ST-174 408

OM-130 098 Page 23