B. Auxiliary Power

Trouble

Remedy

 

 

No output at auxiliary power

Reset circuit breaker CB1 and/or CB2 (see Section 6-1 or 6-2).

receptacles.

 

 

 

 

Disconnect equipment from auxiliary power receptacles during start-up.

 

 

 

Have Factory Authorized Service Agent check brushes and slip rings, and field excitation circuit.

 

 

Low or high output at auxiliary power

Check engine speed, and adjust if necessary (see Section 7-5).

receptacles.

 

 

 

Low output at optional auxiliary power

Check engine speed, and adjust if necessary (see Section 7-5).

junction box.

 

 

 

 

If optional remote device is being used, set A/V Control switch in Remote position and remote device at

 

maximum (see Section 5-3).

 

 

 

If optional remote device not being used, set A/V Control switch in Panel position (see Section 5-3).

 

 

 

Check and replace fuses F1, F2, and/or F3, if necessary (see Section 7-3).

 

 

 

Have Factory Authorized Service Agent check brushes and slip rings.

 

 

No output from optional auxiliary power

Check connections to auxiliary power plant (see Section 7-3).

plant; weld output and standard auxiliary

 

power receptacle output okay.

 

 

 

 

Check fuses F1, F2, and F3 and replace if necessary (see Section 7-3).

 

 

C. Engine

Trouble

Remedy

 

 

Engine does not start.

Check fuel level. Open fuel valve (see Section 4-5).

 

 

 

Check optional Magnetic Shutdown switch fuse F and replace if open (see Section 7-6).

 

 

 

Check battery and replace if necessary.

 

 

 

Check connections to Engine Control switch.

 

 

 

Check oil level. Optional automatic shutdown system stops engine if oil pressure gets too low or oil

 

temperature gets too high.

 

 

 

See engine manual.

 

 

 

Have Factory Authorized Service Agent check engine charging system.

 

 

Engine suddenly stops.

Check oil level. Optional automatic shutdown system stops engine if oil pressure gets too low or oil

 

temperature gets too high.

 

 

 

Check optional Magnetic Shutdown switch fuse F and replace if open (see Section 7-6).

 

 

Engine slowly stopped; unable to restart

Check fuel level. Open fuel valve (see Section 4-5).

engine.

 

 

 

Engine does not stop when Engine Con-

Use manual shutoff lever to stop engine (see Section 5-1). Check connections to Engine Control switch.

trol switch is placed in Off position.

Have Factory Authorized Service Agent check engine fuel solenoid.

 

 

Engine remains at idle speed when

Have Factory Authorized Service Agent check Engine Control switch and idle module.

Engine Control switch is placed in Run/

 

Idle position and an arc is struck (models

 

with automatic idle option only.)

 

 

 

Engine will not run at idle speed. (models

Check throttle solenoid fuse F4, and replace if open (see Section 7-6).

with automatic idle option only.)

 

 

 

 

Have Factory Authorized Service Agent check Engine Control switch and idle module.

 

 

Battery discharges between uses.

Make sure Engine Control switch is in Off position when unit is shut down.

 

 

 

Clean battery, terminals, and posts with baking soda and water solution; rinse with clear water.

 

 

 

Periodically recharge battery (approximately every three months).

 

 

 

Replace battery.

 

 

Engine uses oil during run-in period;

Dry engine (see Section 9).

wetstacking occurs.

 

 

 

 

See engine manual.

 

 

OM-130 098 Page 32

Page 35 Page 37
Page 36
Image 36
Hobart 3225DX manual Auxiliary Power, Engine, Maximum see Section, Check connections to auxiliary power plant see Section
Page 35 Page 37

3225DX specifications

The Hobart 3225DX is a robust and versatile commercial dishwasher designed to meet the needs of restaurants, catering services, and institutions requiring efficient dishwashing solutions. Engineered for high performance, this machine combines advanced technology with user-friendly features to deliver exceptional cleaning results.

One of the standout features of the Hobart 3225DX is its high capacity. It can wash up to 60 racks per hour, making it suitable for busy kitchens. The machine is designed to handle a wide variety of dishware, glassware, and utensils, ensuring a thorough clean for all types of kitchenware.

Equipped with a powerful two-speed wash pump, the Hobart 3225DX guarantees optimal cleaning efficiency. Users can choose between a standard wash cycle for regular soiled items and a more intense cycle for heavily soiled dishware. This flexibility allows kitchen staff to adjust the machine's performance based on their specific needs.

The dishwasher features an advanced filtration system that minimizes the need for frequent cleaning of the internal components. This system captures food particles and debris, enhancing the machine's longevity and maintaining consistently clean results. Additionally, the Hobart 3225DX is designed with a built-in booster heater that increases water temperature to ensure optimal sanitization, complying with health and safety standards.

User convenience is a key consideration in the design of the Hobart 3225DX. The intuitive controls and clear display make operation straightforward, even for first-time users. The machine is also engineered for easy maintenance, with accessible components that allow for quick service and troubleshooting.

Another notable characteristic is its energy efficiency. The Hobart 3225DX is designed to minimize water and energy consumption without compromising performance. This aligns with the growing emphasis on sustainability in the foodservice industry, offering an eco-friendly solution that helps businesses reduce operational costs.

In summary, the Hobart 3225DX is an efficient, high-capacity commercial dishwasher that combines powerful cleaning capabilities with user-friendly features. Its advanced wash pump, effective filtration system, and energy-efficient design make it an ideal choice for any busy kitchen looking to streamline dishwashing operations and maintain the highest hygiene standards.
Top Page Image Contents