Hobart 3225DX manual Overload Protection Servicing Optional Ether Starting Aid, Full Empty

7-6. Overload Protection

3

1

2

7-7. Servicing Optional Ether Starting Aid

1

	3
33 oz	15 oz
(935 g)	(425 g)
Full	Empty

2

YStop engine.

.When a fuse opens, it usually indicates a more serious prob- lem exists. Contact a Factory Authorized Service Agent.

1Magnetic Shutdown Switch MS1 (Optional)

2Fuse F (See Parts List)

Fuse F protects magnetic shut- down switch MS1. If fuse F opens, the engine stops.

3Throttle Solenoid Fuse F4 (Optional)

Fuse F4 protects the throttle sole- noid from overload on models with automatic idle option. If fuse F4 opens, the engine does not run at idle speed.

Check fuses and replace if open.

Tools Needed:

Ref. ST-156 199-B / ST-801 740

YStop engine.

YImproper handling or expo- sure to ether can harm your health. Follow manufactur- er’s safety instructions on cylinder.

If engine does not start in cold weather, check ether cylinder as follows:

Remove cylinder from valve.

1Ether Cylinder

2Valve

3Scale

Weigh cylinder to see if it is empty.

Be sure atomizer is not plugged and valve fitting is clean.

Replace cylinder according to Section 4-6.

ether2 7/96 – ST-153 382-A / S-0692

OM-130 098 Page 30