Installation, Operation, and Care of

MODEL 610 SLICER

SAVE THESE INSTRUCTIONS

GENERAL

The model 610 slicer is compact, convenient, and easy to use. The finish is polished anodized aluminum and the slicer is designed to be easy to clean. The 15 HP motor delivers acceptable performance in kitchens or food stores.

INSTALLATION

UNPACKING

Immediately after unpacking the slicer, check it for possible shipping damage. If the slicer is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to make sure that it agrees with the specifications on the machine data plate (120 Volts / 60 Hertz / 1 Phase).

To install the carriage handle, the carriage must be removed. Loosen the carriage hand knob (Fig. 1) and lift the carriage from its support. Install the carriage handle (Fig. 1) in the hole in the back of the carriage and secure it with the supplied fasteners.

Replace the carriage and secure it by tightening the carriage hand knob.

CARRIAGE HANDLE

CARRIAGE HAND KNOB

PL-41517-1

Fig. 1

This machine must be thoroughly cleaned and sanitized after installation and before being put into service. Refer to CLEANING, page 3.

ELECTRICAL

WARNING: THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THIS PLUG MUST BE CONNECTED TO A PROPERLY GROUNDED OUTLET. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.

OPERATION

SAFETY

SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING POSITIONS ANYTIME THE SLICER IS IN USE.

The KNIFE GUARD (Fig. 2) must be in position over the knife and secured by tightening the hand knob (Fig. 2).

The MEAT GRIP (Fig. 2) must be used when slicing to keep your hands away from the knife.

When the slicer is not running, the INDEX KNOB (Fig. 2) must be set on zero (fully clockwise) to prevent the knife edge from being exposed.

Always UNPLUG the power cord before cleaning or moving the slicer.

– 2 –

Page 2
Image 2
Hobart manual Model 610 Slicer General, Installation, Operation

610 specifications

Hobart 610 stands out as a versatile and reliable industrial kitchen equipment piece, designed primarily for commercial food preparation environments such as restaurants, catering services, and institutional kitchens. This powerful appliance is well-regarded for its robust performance, ease of use, and efficiency, making it a staple in numerous culinary operations.

One of the main features of the Hobart 610 is its effective mixing capabilities. With a strong motor coupled with a well-designed bowl, it can handle a variety of food preparations, from kneading dough to whipping cream. The mixing speed can be easily adjusted, allowing chefs to achieve the desired consistency for different recipes. This flexibility makes it ideal for a multitude of tasks, ranging from mixing batter to emulsifying sauces.

The construction of the Hobart 610 emphasizes durability and hygienic design. It is typically made from high-quality stainless steel, ensuring it withstands the rigors of daily use in busy kitchens while remaining easy to clean and maintain. The stainless steel bowl is not only robust but also resistant to rust and corrosion, which is an essential feature in the foodservice industry.

Technologically, the Hobart 610 incorporates advanced features that enhance usability and efficiency. The appliance often includes automatic safety shut-off mechanisms that prevent accidents and over-processing. Additionally, it may come equipped with a robust gear drive system that ensures consistent blending and mixing, even with heavy ingredients.

In terms of capacity, the Hobart 610 is typically designed to accommodate large batches of ingredients, making it well-suited for high-volume production. The machine’s large capacity can save time and effort, allowing chefs to streamline food preparation processes.

Another notable characteristic is its versatility. The Hobart 610 can be fitted with various attachments, such as dough hooks and whisks, expanding its functionality beyond mixing to include tasks like kneading and beating. This attachment capability transforms the appliance from a simple mixer into a multifunctional kitchen workhorse.

Overall, the Hobart 610 exemplifies quality engineering combined with user-friendly features, making it an indispensable tool in professional kitchens where efficiency and reliability are paramount. Its blend of durability, versatility, and advanced technology ensures it meets the demanding needs of modern culinary professionals.