Hobart 873440 manual ASSEMBLY continued

ASSEMBLY (continued)

4.Assemble the Hollymatic model 120 bulker to the Pedestal. To fasten the bulker to its pedestal, insert the pin through the hole in

the bracket. The bulker can swivel 360°. Reassemble paper roll (Fig. 3).

5.Assemble the bulker adapter to the bulker input tube using the clamp provided with the Hollymatic Bulker, (Fig. 4).

6.Assemble the Tightening Ring shipped with the Hollymatic Bulker to the cylinder of the Hobart Mixer-Grinder (Fig. 5). A second clamp (also sourced from Hollymatic, Fig. 5) must be used to clamp the Bulker Adapter to the Tightening Ring.

When making the final linkup of the Hollymatic model 120 Bulker to the Hobart Mixer-Grinder, the height of the Bulker may need to be adjusted. The Bulker Adapter can be swiveled to allow the final adjustment before locking the clamps in place.

BRACKET

PIN

SUPPORT

PAPER ROLL

PL-41439-1

Fig. 3

BULKER ADAPTER

BULKER

CLAMP

PL-41440-1

Fig. 4

TIGHTENING RING

CLAMP

PL-41441-1

Fig. 5

FORM 34483 (May 2000) – 2 – PRINTED IN U.S.A.