Hobart C44A ML-104047, C44A ML-104050, C44A ML-38898, C44A ML-38899, C44AW ML-103946, C44AW ML-103947, C44AW ML-104082, C44AW ML-104083, C54A ML-104198, C54A ML-104199, C64A ML-103908, C64A ML-103909, C88A ML-110041, C88A ML-110042, CRS66A ML-38, CRS66A ML-38947 CLEANING

– 23 –

CLEANING

The machine must be thoroughly cleaned at the end of each working shift, or at least twice a day. Use

only products formulated to be safe on stainless steel.

1. Turn the Motor and Power switches OFF.

2. Open the door(s). Standard door interlock switches prevent machine operation with inspection

door(s) open.

3. Check the upper and lower final rinse nozzles to make sure they are free of lime and solids.

Fig. 14

4. Open drain(s) by pulling drain lever(s) up (Fig. 12).

5. Remove wash arms. Remove wash arm end caps (Fig. 14) and push any nozzle obstructions into

the wash arms. Thoroughly flush the wash arms in a sink and replace the wash arm end caps.

6. Clean off any scraps from machine walls.

7. Clean dish tables in the dishwasher.

8.Remove all strainer pans and strainer basket(s).

Empty contents into garbage can or disposer and

thoroughly clean pans and basket(s).

9. Clean pump intake strainer (Fig. 15).

10.On C54A, CRS76A, CCS76A and CPW90A

machines, remove both flowback strainer pans

and clean.

11. Remove curtains. Thoroughly scrub, rinse and

allow to dry at the end of each day’s operation. See

Curtain Installation for proper curtain installation. Fig. 15

Hobart manual CLEANING