Hobart C44A ML-104047, C44A ML-104050, C44A ML-38898, C44A ML-38899, C44AW ML-103946, C44AW ML-103947, C44AW ML-104082, C44AW ML-104083, C54A ML-104198, C54A ML-104199, C64A ML-103908, C64A ML-103909, C88A ML-110041, C88A ML-110042, CRS66A ML-38, CRS66A ML-38947

– 9 –

ASSEMBLY

Dish tables should be fitted into the dishwasher (Fig. 2). Use mastic between table and lip of tank to

prevent leakage. Rack track height should be from 1/4 to 5/16" (Fig. 2) above the tank lip. Dish tables

should be sloped so that any water carried from the dishwasher will drain back into it.

Fig. 2

Remove the strainer basket and strainer pans from the wash chamber (Fig. 3).

Place the overflow tube in the retainer (Fig. 4).

Fig. 3 Fig. 4

Contents

Main C-LINE A & AW DISHWASHERS MODEL R-L OPERATION L-R OPERATION Page TABLE OF CONTENTS Installation, Operation and Care Of C-LINE A & AW DISHWASHERS SAVE THESE INSTRUCTIONS GENERAL Page Page Page INSTALLATION Page Page Page Page Perimeter Calculation Formula Exhaust Hoods for Commercial Cooking Equipment Page Page Page Page Page Page OPERATION Page Page CLEANING Page MAINTENANCE TROUBLESHOOTING

Hobart manual - page 9