Installation, Operation, and Care of
MODEL FP300
FOOD PROCESSOR
SAVE THESE INSTRUCTIONS
GENERAL
The FP300 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing vegetables, fruits, or cheese. The compact unit is designed for ease of operation and quick cleaning. A Work Table, a Wall Rack, and a wide range of slicer, shredder, and dicing plates are available options.
INSTALLATION
UNPACKING
Immediately after unpacking the FP300, check for possible shipping damage. If the Food Processor is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to assure that it agrees with the specifications on the data plate located at the rear.
Do not lift the unit with any hinged or extended parts; lift only with one hand under the protruding lip at the rear near the base of the motor compartment and the other hand underneath the chute.
LOCATION
The FP300 should be operated on a suitable counter height surface. A pan (not provided), suitable for kitchen use, can be used to capture the product at the exit chute.
© HOBART CORPORATION, 1994 | – 2 – |
