– 14 –
FOOD SERVICE STEAM MODE
This mode can be used to provide steam on a periodic basis throughout operation. When this mode is
enabled, the STEAM TIMER controls how many seconds of steam are provided to the oven, while a
value entered in the Parameter 14 (P14) setup controls how frequently the steam is operated.
To enable the Food Service Steam mode:
1. Enter the parameter setup mode. (See Entering Setup Mode.)
2. Select Parameter 14.
3. If the BAKE TIMER window displays ‘0’, it is set up for Bakery Mode (factory default). Press the
UP or DOWN arrow buttons to enter FSS mode (display will change to a 3-digit number).
4. Set the desired time between steam cycles using the UP or DOWN arrow buttons. The range is
from 300 seconds (5 min.) to 990 seconds (approximately 17 min.), and increments by 10
seconds at a time.
5. After setting the desired cycle, press the POWER ON OFF button to save the settings.
6. The STEAM TIMER will now operate in 1-second increments, up to 10 seconds, to set the duration
of steaming.
Examples: ‘300’ is selected for P14
‘3’ is entered in STEAM TIMER
= steam is turned on for 3 seconds every 300 seconds (5 min.)
‘990’ is selected for P14
‘3’ is entered in STEAM TIMER
= steam is turned on for 3 seconds every 990 seconds (17 min.)
To return the oven to Bakery Mode, repeat the above process to access P14 and set the value in the
BAKE TIMER window to ‘0’. The STEAM TIMER will now operate in 5-second increments.
SAFETY ALARM (STANDARD FEATURE, NO PARAMETER SETUP REQUIRED)
If the temperature at the probe is in the range of 570 - 600 degrees Fahrenheit for 10 seconds, the unit
will do the following:
1. Shut off all features.
2. Sound an alarm.
3. Flash the OVEN TEMP display (actual temperature is displayed).
4. Display the letters ‘SHdn’ in the BAKE TIMER display.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES. THERE MAY BE MULTIPLE CIRCUITS. BE SURE ALL
CIRCUITS ARE DISCONNECTED.
WARNING: IF GAS OVEN, SHUT OFF GAS. CONTACT YOUR AUTHORIZED HOBART BAKERY
SYSTEMS SERVICE OFFICE. DO NOT ATTEMPT TO RESTART THE OVEN UNTIL IT HAS BEEN
INSPECTED BY AN AUTHORIZED SERVICER.