– 29 –
Inspect Oven Lamps
1. Lamps should be on when oven is powered.
2. If not, replace lamps.
A. Unscrew lamp cover (Fig. 1) to disengage
from lamp sockets. Remove lamp from socket.
3. Reverse procedure to install new lamps.
Fig. 1
Clean and Vacuum Components and Burner Area
1. Clean the burner chamber (Fig. 2) area of dust and/or
lint accumulation.
A. Remove screw securing control panel door and
swing door open to access burner chamber
area.
Fig. 2
B. Vacuum the burner chamber area of dust and/
or lint accumulation.
NOTE: Individual burners may be inspected for clogs or
debris without removing individual burners.
2. Check and clean all air passageways.
A. Clean all burner chamber air passageways of
dust and/or lint accumulation.
3. Clean convection panel grill.
A. Clean convection panel grill (Fig. 3) of dust and/
or lint accumulation.
4. Clean draft inducer housing grill guard (Fig. 4).
A. Access draft inducer housing on top of oven
and clean grill cover of dust and/or lint
accumulation.
Fig. 3 Fig. 4