– 38 –
Fig. 73
HIGH SIDE
TOWARD REAR
SHORT SIDE
TOWARD CENTER
Fig. 71
Fig. 72
12. Swing element cover back and raise up to
clear rotor support and rotor arm (Fig. 71).
Continue swinging element cover back until
mounting studs protrude through three holes
in element cover.
13. Reinstall element cover: Tighten 7/16"
center nut using 7/16" nutdriver
(Fig. 72).
14. Working from front of oven, position
high side of vent-grate toward rear of
oven, short side faces center of oven
(Fig. 73).