– 9 –
INITIAL STARTUP
Power On
Toggle the Main Power switch on the front panel of the oven to the ON position; the red indicator light
on the switch comes on (Fig. 9).
Idle Mode
When the oven is first turned on, the display shows the time of day and the last operated program
number. Any programmed steps for the selected program are indicated by illuminated step LEDs. The
interior oven lights are off.
Setting the Clock
The oven's clock is preprogrammed for 12-hour operation as standard. The oven can be reprogrammed
for 24-hour operation by your local Hobart Service office.
Begin from idle mode.
To set the time of day, press
CLOCK
.
The time display goes blank.
The AM or PM light blinks.
• Enter the time of day (HH:MM) using the number keys.
• Press
CLOCK
to toggle A.M. or P.M. (not necessary if clock
is programmed for 24-hour operation).
• Press
ENTER
to accept a valid entry. The control returns to
idle mode.
• If a nonvalid value such as 10:95 is in the time display
when
ENTER
is pressed, the beeper sounds twice and the
time display goes blank.
Changing Temperature Readings to Celsius
The oven is preprogrammed for temperatures to read in Fahrenheit degrees as standard. The oven
can be reprogrammed for Celsius temperature readings by your local Hobart Service office.
P789
456
123
0ENTERCLEAR
START
CLOCK
ADD
5 MIN
STOP
TEMPERATURE TIME
F
•C
t
PROGRAM
AM
•PM
STEP
4•
3•
2o
1o
P09:25