Installation (LX/LXi and LXG/LXiG)

WARNING: DISCONNECT THE

ELECTRICAL POWER TO THE

MACHINE AND FOLLOW LOCKOUT /

TAGOUT PROCEDURES.

1.Remove unit from wall to provide access to components.

2.Remove Base Cover from front of unit per Fig 1.

3.Remove Service Cover, Wire Way and Motor Cover from rear of unit per Fig 2.

NOTE: This kit is for all LX/ LXi and LXG/LXiG dishwashers. Machines with serial numbers between 23-1083-999 and 23-1084-003 and starting with serial number 23-1085-462 and higher have a drain pump. Machines with lower serial numbers utilize a drain solenoid valve. Identify machine type and select correct wiring harness from kit.

NOTE: For drain pump machines use harness 919275. For solenoid machines use wiring harness 919276.

F25230 (Rev. A, May 2008)

Page 2 of 8

© HOBART 2008