INSTALLATION, OPERATION AND CARE OF

MODEL HPX SERIES STEAMERS

PLEASE KEEP THIS MANUAL FOR FUTURE USE

GENERAL

The Hobart steamer cooks vegetables, frankfurters, eggs, chicken, sausage, fish, corned beef and many other meats and food items. These steamers are produced with quality materials and workmanship.

The HPX3 Steamer is rated at 9.0 kW. It can be converted in the field to 6.0 kW with an optional 2/3 connection. The HPX5 Steamer is rated at 15.0 kW. It can be converted in the field to 10 kW with an optional 2/3 connection. Contact your local Hobart service technician to convert to the optional kW rating.

Proper installation, usage and maintenance of your steamer will result in many years of satisfactory performance.

It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided.

INSTALLATION

Before installing, verify the electrical service agrees with the specifications on the machine data plate on the left side panel. If the supply and equipment requirements do not agree, do not proceed with the installation. Contact your dealer or Hobart Corporation immediately.

UNPACKING

This steamer was inspected before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking, check for possible shipping damage. If the steamer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Carefully unpack the steamer and place in a work- accessible area as near to its final installed position as possible.

LOCATION

The installation location must allow adequate clearances for servicing and proper operation. Minimum clearances for proper air circulation are 2" (5.1 cm) on the sides and 6" (15.2 cm) on the back.

ASSEMBLY

This steamer comes with four 41/2" (11.4 cm) support legs and four large flat washers. Place the steamer on its left side, being careful to avoid scratching the finish. Place one flat washer on the bolt side of each leg. Thread the four legs into the mounting holes provided. Do not mount the steamer directly to a countertop unless the support legs are in place.

– 3 –

Page 2 Page 4
Page 3
Image 3
Hobart HPX3, ML-126826 manual General, Installation, Unpacking, Location, Assembly
Page 2 Page 4

HPX3, ML-126826 specifications

Hobart ML-126826, also known as HPX3, is a state-of-the-art food processing machine designed for commercial kitchens that demand efficiency and reliability. This advanced piece of equipment incorporates cutting-edge technology to streamline food preparation operations, making it an indispensable tool for chefs and food service professionals.

One of the main features of the Hobart ML-126826 HPX3 is its robust construction. Built with high-quality stainless steel, the machine is not only durable but also resistant to corrosion and staining, ensuring longevity even in the most demanding environments. Its sleek design allows for easy cleaning, promoting hygiene in busy kitchen settings.

The HPX3 boasts a powerful motor that enables it to handle a variety of food processing tasks with ease. Whether it’s chopping, mixing, or grinding, this machine can effortlessly tackle the job. The variable speed control feature allows users to adjust the speed according to the specific requirements of different ingredients, ensuring precise texture and consistency.

In terms of technology, the Hobart ML-126826 integrates an advanced control panel with user-friendly buttons and indicators. This interface simplifies operation, allowing staff to operate the machine with minimal training. With features like a digital timer and automatic shut-off, users can program the machine for specific tasks, enabling multitasking and reducing the potential for errors.

The HPX3 also incorporates safety features that protect operators, including a locking lid that prevents accidental opening while the machine is in operation. This attention to safety ensures that busy chefs can focus on their culinary creations without worry.

Another notable characteristic of the Hobart ML-126826 HPX3 is its versatility. It comes with a variety of attachments that allow for different food processing functions, catering to diverse culinary needs. From making dough to producing purees, the machine adapts to the requirements of various recipes.

In conclusion, the Hobart ML-126826, or HPX3, is a powerful, versatile, and user-friendly food processing machine that stands out in the commercial kitchen landscape. Its combination of high-quality materials, advanced technology, and safety features make it an ideal choice for food service professionals looking to enhance their efficiency and productivity in the kitchen.
Top Page Image Contents