Hobart ML-29206, ML-29222, ML-29207, ML-29042 Topics FCC Note Verify Correctness of Weight & Price

Quantum System

Quick-Start Guide - Operator

This Quick-Start Guide is designed to get you up and running and to

Welcome!use as a handy reference. Refer to the companion Operator and Supervisor Manuals on CD for complete details.

The Quantum Scale Printer System is perfect for your over-the-counter weighing applications. This state-of-the-art weighing system can handle a broad variety of products for deli, bakery, produce, fish and cheese departments. It can also function in a Prepack Scale mode when necessary.

The easy-to-use control panel allows for productive operation. All necessary operator data appears on the screen, and Function Keys (F1– F8) provide easy access to PLU information.

Topics

FCC Note

Verify Correctness

of Weight & Price

The following topics are covered in this Quick-Start Guide:
Topic	Page
Help	3
Reset	3
Power Up the System	3
Rezero the Scale	5
Load Labels	5
Cleaning & Sanitizing	6
Clean the Printhead	7
How to Start a Run	7

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference; in which case, the user will be required to correct the interference at his own expense.

Verification of information on labels should be made routinely. Check the multiplication of price-per-pound times weight, and check the indicated weight against printed weight. Weigh the same package several times to verify consistency. Keep in mind that some packages which weigh near the middle of the 0.01-lb increment will normally vary up or down by 0.01-lb. Greater variation than 0.01-lb indicates a need for adjustment of the system. In such cases, or whenever necessary, contact your authorized Hobart service representative.

2