Quantum System
Clean the Printhead
♦The Printhead should be cleaned approximately once each week, or whenever unclear labels are printed. It is a good idea to clean the Pressure Roller whenever a new roll of labels is installed.
♦Do not use a metal tool on the Printhead; this could scratch or break the Printhead.
♦Labels should not become stuck on machine parts. If they do, remove the labels at once, following the instructions in the Printhead Cleaning Kit.
♦To obtain a Printhead Cleaning Kit, contact your local Hobart office; request Part Number
TO CLEAN THE PRINTHEAD OR
PRESSURE ROLLER:
1.Check the Printhead and Pressure Roller for labels or adhesive before inserting every roll of labels. Clean as needed.
2.Remove the Label Cassette.
3.Use the plastic “Lil’ ChiZler” in the Printhead Cleaning Kit to remove
4.To remove
5.Soak the cotton swab tip with the Printhead Cleaning Solution.
6.Scrub the Printhead or Pressure Roller with the swab until all residue is removed.
7.Moisten the swab as needed with Printhead Cleaning Solution.
8.Allow the Printhead or Pressure Roller to dry.
9.Return the Cleaning Kit to its holding box.
10.Replace the Label Cassette.
How to Start a Run
The following list gives you a brief overview of how each Weigh Type selection functions within an operation. Use the UP ARROW ( ) and DOWN ARROW ( ) keys to move the cursor to the Weigh Type you require. The RIGHT ARROW ( ) and LEFT ARROW ( ) move between the columns.
7
