Access PrePack System Operator Manual
F-35512 (Mar. 2006) 1-1 Introduction
Chapter 1: Introduction
Introduction
Welcome The Access PrePack System was designed as a meat room or pro-
duce back room scale. It gives you merchandising capabilities
with multiple fonts, graphics, and label types.
Access PrePack System
All necessary operator data appears on the touch screen.
FCC Note This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference; in which
case, the user will be required to correct the interference at their
own expense.
Verify Correctness of
Weight and Price
Routinely verify label information. Check the multiplication of
price per pound times weight, and check the scale weight against
printed label weight. Weigh the same package several times to
verify outcome consistency. Packages that weigh near the middle
of the 0.01 lb. increment will normally vary up or down by
0.01 lb. Greater variation than 0.01 lb indicates the system needs
adjustment. In such a case, or whenever necessary, contact your
local Hobart Representative.