WS-C206/WS-C208 Hobart Compact Water Softener Installation Instructions - INSTALLATION

INSTALLATION

INSTALLATION WS-C206/WS-C208

Disconnect the

electrical power to the machine and follow lockout / tagout procedures.

1.Locate water supply line and appropriate drains for softener installation.

2.Install by-pass valving.

NOTE: If installing a WS-208 install wheel kit. WS- C206 already has wheels installed.

5.Locate brass in/out adapters, 4 O-rings, and silicone seal lube.

Fig. 1

3.Install high temperature prefilter if needed.

Fig. 3

6.Locate connector hoses and apply 2 to 3 wraps of Teflon tape to the male threads.

Fig. 4

7.Thread the brass in/out adapters tightly onto the threaded ends of the connector hoses.

Fig. 2

4.Remove all items from shipping package.

Page 3 of 10

 

F25311 Rev. A (0913)