DISC SELECTION
DISC SELECTION WS-C206/WS-C208
The amount of hardness removed (in compensated gpg) will be based on the amount of brine and the meter disc selected.
1.Test water supply for hardness and iron content. Use water analysis test kit available through Pro Products Inc. The recommended kit is #2401 Field Analysis Kit. To order test kit contact Pro Products at
2.Determine the compensated hardness for raw water.
A.Hardness value in gpg.
B.Ferrous iron value in ppm multiplied by 3.
C.Add values together.
3.Salt setting is predetermined by height of float cup. Float cup setting is listed in Specification Table.
Specifications | ||
Salt usage / generation | 0.5 lbs. | 1.0 lbs. |
Capacity | 1,746 grains | 2,527 grains |
Efficiency | 3,492 gr./lb. | 2,527 gr./lb. |
Dosing | 2.7 lbs./cu. ft. | 5.5 lbs./cu. ft. |
Float cup setting | 5.25" | 6.25" |
Specifications | ||
Salt usage / generation | 1.0 lbs. | 1.4 lbs. |
Capacity | 4,094 grains | 4,818 grains |
Efficiency | 4,094 gr./lb. | 3,442 gr./lb. |
Dosing | 2.5 lbs./cu. ft. | 3.5 lbs./cu. ft. |
Float cup setting | 5.25" | 5.75" |
Disc Number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
Compensated Hardness | 2 | 5 | 8 | 10 | 13 | 15 | 18 | 20 | |
at .5 lb. setting * | |||||||||
|
|
|
|
|
|
|
| ||
Compensated Hardness | 4 | 8 | 11 | 15 | 19 | 23 | 27 | 30 | |
at 1.0 lb. setting * | |||||||||
|
|
|
|
|
|
|
| ||
Gallons Between | 583 | 282 | 194 | 146 | 117 | 97 | 83 | 73 | |
Regeneration | |||||||||
|
|
|
|
|
|
|
| ||
Regeneration Gallons | 9.1 | 9.1 | 9.1 | 9.1 | 8.4 | 6.6 | 5.4 | 4.4 | |
Per Minute @ 15 psig. | |||||||||
|
|
|
|
|
|
|
| ||
* Compensated hardness in gpg = Hardness + (3 x Fe in ppm) |
|
|
|
| |||||
Page 9 of 10 |
| F25311 Rev. A (0913) |
|