.A complete Parts List is available at www.HobartWelders.com
5-6. Serial Number And Rating Label Location
The serial number and rating information for this product is located on back. Use rating label to determine input power requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
5-7. Selecting A Location And Connecting 115 Volt Input Power
! Do not move or operate unit
where it could tip.18 in. (460 mm)
| ! | Installation must meet all |
|
| National and Local Codes − |
|
| have only qualified persons |
|
| make this installation. |
| ! | Special installation may be |
|
| required where gasoline or |
|
| volatile liquids are present − |
|
| see NEC Article 511 or CEC |
|
| Section 20. |
| 1 | Grounded Receptacle − |
|
| NEMA Type 5−15R |
|
| (Customer Supplied) |
| For | 115 volt AC input power, a 20 |
| ampere individual branch circuit | |
| protected by | |
| circuit breaker is required. | |
| 2 | Plug From Unit |
| Select extension cord of 12 AWG | |
1 | for up to 50 ft (15 m) or 10 AWG for | |
50 up to 100 ft (30 m). | ||
2
18 in.
(460 mm)
803
