Hobart Welding Products 1435 manual Optional Auxiliary Power Panels, Auxiliary Power Panel 495

6-2. Optional Auxiliary Power Panels

Auxiliary Power Panel 495 315		Auxiliary Power Panel 495 298
	(USA)	(USA)

Auxiliary Power Panel 495 279	Auxiliary Power Panel 495 253		Auxiliary Power Panel 495 288
(Canada)		(South Africa)	(South America)

Auxiliary Power Panel 495 289	Auxiliary Power Panel 495 290	Auxiliary Power Panel 495 283
(Australia)	(Europe)	(S.E. Asia)

Ref. ST-802 124 / H-495 290 / H-495 283

YIf unit does not have GFCI recep- tacles, use GFCI-protected exten- sion cord.

YPower may still be present at a re- ceptacle when a circuit breaker trips.

Unplug power cord before attempt- ing to service accessories or tools.

.Auxiliary power decreases as weld current increases.

Set Amperage control at max. for full auxiliary power.

.Place throttle lever in Run position (far right) for auxiliary power.

Circuit breakers protect the generator from overload.

.Press button to reset circuit breaker. If breaker continues to open, contact Factory Authorized Service Agent.

OM-498 Page 21