ARC RAYS can burn eyes and skin.

Arc rays from the welding process produce intense visible and invisible (ultraviolet and infrared) rays that can burn eyes and skin. Sparks fly off from the weld.

DWear a welding helmet fitted with a proper shade of filter to protect your face and eyes when welding or watching (see ANSI Z49.1 and Z87.1 listed in Safety Standards).

DWear approved safety glasses with side shields under your helmet.

DUse protective screens or barriers to protect others from flash and glare; warn others not to watch the arc.

DWear protective clothing made from durable, flame-resistant mate- rial (leather and wool) and foot protection.

WELDING can cause fire or explosion.

Welding on closed containers, such as tanks, drums, or pipes, can cause them to blow up. Sparks can fly off from the welding arc. The flying sparks, hot workpiece, and hot equipment can cause fires and

burns. Accidental contact of electrode to metal objects can cause sparks, explosion, overheating, or fire. Check and be sure the area is safe before doing any welding.

DProtect yourself and others from flying sparks and hot metal.

DDo not weld where flying sparks can strike flammable material.

DRemove all flammables within 35 ft (10.7 m) of the welding arc. If this is not possible, tightly cover them with approved covers.

DBe alert that welding sparks and hot materials from welding can easily go through small cracks and openings to adjacent areas.

DWatch for fire, and keep a fire extinguisher nearby.

DBe aware that welding on a ceiling, floor, bulkhead, or partition can cause fire on the hidden side.

DDo not weld on closed containers such as tanks, drums, or pipes, unless they are properly prepared according to AWS F4.1 (see Safety Standards).

DConnect work cable to the work as close to the welding area as practical to prevent welding current from traveling long, possibly unknown paths and causing electric shock and fire hazards.

DDo not use welder to thaw frozen pipes.

DRemove stick electrode from holder or cut off welding wire at contact tip when not in use.

DWear oil-free protective garments such as leather gloves, heavy shirt, cuffless trousers, high shoes, and a cap.

DRemove any combustibles, such as a butane lighter or matches, from your person before doing any welding.

FLYING METAL can injure eyes.

DWelding, chipping, wire brushing, and grinding cause sparks and flying metal. As welds cool, they can throw off slag.

DWear approved safety glasses with side shields even under your welding helmet.

OM-210 088 Page 2

BUILDUP OF GAS can injure or kill.

D Shut off shielding gas supply when not in use.

D Always ventilate confined spaces or use approved air-supplied respirator.

HOT PARTS can cause severe burns.

DDo not touch hot parts bare handed.

DAllow cooling period before working on gun or

torch.

MAGNETIC FIELDS can affect pacemakers.

D Pacemaker wearers keep away.

D Wearers should consult their doctor before going near arc welding, gouging, or spot welding operations.

NOISE can damage hearing.

Noise from some processes or equipment can damage hearing.

DWear approved ear protection if noise level is high.

CYLINDERS can explode if damaged.

Shielding gas cylinders contain gas under high pressure. If damaged, a cylinder can explode. Since gas cylinders are normally part of the welding process, be sure to treat them carefully.

DProtect compressed gas cylinders from excessive heat, mechani- cal shocks, slag, open flames, sparks, and arcs.

DInstall cylinders in an upright position by securing to a stationary support or cylinder rack to prevent falling or tipping.

DKeep cylinders away from any welding or other electrical circuits.

DNever drape a welding torch over a gas cylinder.

DNever allow a welding electrode to touch any cylinder.

DNever weld on a pressurized cylinder – explosion will result.

DUse only correct shielding gas cylinders, regulators, hoses, and fit- tings designed for the specific application; maintain them and associated parts in good condition.

DTurn face away from valve outlet when opening cylinder valve.

DKeep protective cap in place over valve except when cylinder is in use or connected for use.

DRead and follow instructions on compressed gas cylinders, associated equipment, and CGA publication P-1 listed in Safety Standards.

Page 5 Page 7
Page 6
Image 6
Hobart Welding Products 150 ARC Rays can burn eyes and skin, Welding can cause fire or explosion, Noise can damage hearing
Page 5 Page 7

120, 150 specifications

Hobart Welding Products has long been recognized for delivering high-quality welding solutions, and the Hobart 150,120 welder is no exception. This versatile, compact welder is designed to meet the needs of both hobbyists and professionals alike, making it a popular choice among welders in various industries.

One of the main features of the Hobart 150,120 is its dual voltage capability. It operates on both 120V and 240V power sources, providing users the flexibility to work in a variety of environments, whether at home or in a professional shop setting. This feature makes it particularly appealing for welding enthusiasts who may not always have access to higher voltage outlets.

The welder is equipped with a robust 30-140 amp output range, allowing users to tackle a wide range of welding tasks. This output capability supports a variety of materials, including mild steel, stainless steel, and aluminum, with thicknesses up to 1/4 inch. Whether you're working on auto repair, fabrication projects, or DIY tasks around the house, the Hobart 150,120 is well-suited for the job.

Another significant advantage of the Hobart 150,120 is its user-friendly design. The welder features an easy-to-read control panel that allows users to adjust the settings conveniently. The intuitive parameters ensure that both beginners and experienced welders can quickly achieve optimal results. Additionally, it incorporates a built-in thermal overload protection feature to prevent overheating, enhancing safety during operation.

In terms of technology, the Hobart 150,120 utilizes a MIG welding process that simplifies the welding experience. This process feeds a continuously welding wire through the welding gun, reducing the need for frequent reloading and ensuring a smooth, consistent weld. The inclusion of a gas solenoid also enables users to switch between gas-shielded and flux-cored wire, providing versatility for different applications.

Lastly, the compact design of the Hobart 150,120 makes it portable and easy to store, which is particularly advantageous for users with limited workspace. With its combination of robust features, advanced technologies, and user-friendly operation, the Hobart 150,120 welder stands out as an excellent choice for anyone looking to achieve high-quality welds with efficiency and ease. It firmly establishes Hobart Welding Products as a leader in the welding market.
Top Page Image Contents