5-3. Installing Work Clamp
. Connection hardware must be tightened with proper tools. Do not just | |
hand tighten hardware. A loose electrical connection will cause poor | |
weld performance and excessive heating of the work clamp. | |
1 | 3 |
| |
6 |
|
2 |
|
5 | 4 |
Tools Needed: |
|
7/16 in. |
|
7/16 in. |
|
1Nut
2Work Cable From Unit
3Work Clamp
4Screw
5Work Clamp Tabs
Bend tabs around work cable.
6 Insulating Sleeves
Slide one insulating sleeve over work cable before connecting to clamp.
Slide insulating sleeves over handles.
802
