Hobart Welding Products 500 manual Remote Amperage Switch, Power Switch

4-3. Remote Amperage Switch

1

Example: Combination Remote Amperage Control – 400 Ampere Non CE Model Shown

1

YArcing can damage switch. Do not change Remote Am- perage switch position while power is on. Arcing inside switch can damage con- tacts, causing switch to fail.

1Remote Amperage Switch

2Remote Amperage Control

Use switch to select way of control- ling amperage adjustment.

For front panel control, place switch in the Panel position.

For remote control, place switch in the Remote position and connect remote amperage control to remote amperage control receptacle (see Section 3-10). See example below.

Set Switch Select Amperage Range

In Example:

Range Selected = 45 to 250 A DC

Maximum Amperage Selected = 100 A DC

Min = 45 A DC

Max = 100 A DC

2

Max (100 A DC)

Min (45 A DC)

Select Maximum Amperage Adjust Remote Control

4-4. Power Switch

1 Power Switch

Use switch to turn unit t On and Off.

1

OM-201 444 Page 21