![](/images/new-backgrounds/1315260/31526049x1.webp)
6-2. Optional Auxiliary Power Receptacles
Simultaneous Welding And Auxiliary Power
Output
Weld Current |
| 120 V | 240 V |
|
Watts | Receptacle | Receptacle |
| |
Amperes |
| |||
| Amperes | Amperes |
| |
|
|
| ||
|
|
|
|
|
250 | 3500 | 31 | 15.5 |
|
225 | 4260 | 39 | 19 |
|
200 | 5140 | 46 | 23 |
|
150 | 6700 | 60 | 30 |
|
100 | 8000 | 62.4 | 31.2 |
|
50 | 8000 | 62.4 | 31.2 |
|
0 | 8000 | 62.4 | 31.2 |
|
|
|
|
|
|
YIf unit does not have GFCI re-
ceptacles, use GFCI- protected extension cord.
.Auxiliary power decreases as weld current increases.
Combined output of all receptacles
1limited to 8 kVA/kW rating of the generator.
GFCI Receptacle Option
1120 V 15 A AC GFCI Recep- tacles GFCI2 and GFCI3
GFCI2 and GFCI3 supply 60 Hz
If a ground fault is detected, the GFCI Reset button pops out and the circuit opens to disconnect the faulty equipment. Check for damaged tools, cords, plugs, etc. connected to the receptacle. Press button to reset receptacle and resume operation.
.At least once a month, run engine at weld/power speed and press Test button to verify GFCI is working properly.
Ref.