r
»
Fig. 16
| ~ |
|
~ | . | Fig 17 |
| ||
|
| . |
~
..
VI. Mainsheet Assembly
Locatemainsheet(part #16).Take oneend of the mainsheet and tie it to the small block hanging at the rear of the boomwith a bowline
(Figure 18).Run the free end through the large block of the traveler block set and then back up
to and through the .small block hanging at the rear of the boom.
Fig. 18
Now run the free end of the mainsheet for- ward along the boom. Run the line through the
circular strap attached to the boom and then run the line through the block attached to the
boomjust forward of the strap.
Continue the line forward and then down through the mainsheet block (part #32) at-
tached to the bottom of the hull behind the mast and the daggerboardslot. Tie the free end of the line in a figure 8 knot about 6 inches from the end. Shown, Figure 19.
~:::j
Fig. 19
