OWNERS
M A N U A L
Step 4
S H I E L D A S S E M B L Y
Attach (22), (CS), and (CT) as shown. Wrench Tighten bolts.
*IMPORTANT*
Now that the Hd1400 machine is completely assembled take time to assure that your unit is assembled square and perpendicular. To check this use a Level to check that the Guide Rods are perpendicular in both directions. If they are not perpendicular in both directions. It will be necessary to loosen some Frame hardware to
Part Descriptions | Hardware Descriptions |
22 - Frame Shield | L - |
| M - |
| AA - 1/2” Flat Washer |
| AD - 1/4” Flat Washer |
| BA - 1/2” Nylok Nut |
| BC - 1/4” Nylok Nut |
| CS - Placard (Right) |
| CT - Placard (Left) |
| DB - Spacer |
Page - 17 | HD1400 Assembly |