OWNERS
M A N U A L
Step 2a
F R A M E A S S E M B L Y
Start assembly by bolting both (1)’s, to (2). Then bolt (3) to the bottom of both (1)’s. Attach the top of (5) to (2), and the bottom of (5) and (4) to (3). Bolt (6), (7), and (8) to (4). Wrench Tighten bolts.
Part Descriptions | Hardware Descriptions | |
1 | - Weight Frame Upright | A - |
2 | - Weight Cage Top Mount | B - |
3 | - Weight Stack Mount | E - |
4 | - Main Support Frame | AA - 1/2” Flat Washer |
5 | - Rear Upright | BA - 1/2” Nylok Nut |
6 | - Main Frame Support | CA - Rubber Foot Pad |
7 | - Right Side Handle |
|
8 | - Left Side Handle |
|
Page - 5 | HD1400 Assembly |