Hoist Fitness RS-1203 owner manual Please Keep this for Your Records

OWNER'S MANUAL

GENERAL MAINTENANCE INFORMATION

(CONTINUED)

Belt and Cable Tension:

•Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be sure they are properly attached.

•Check slack in cables and re-adjust cable tension if needed.

Seat Sleeves, Guide Rods:

•Wipe down adjusting tubes with a dust free rag before applying lubricant.

•Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray. Linear Bearings:

•Referring to the Owners Manual carefully disassemble the bearing from its housing and place a finger full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.

PLEASE KEEP THIS FOR YOUR RECORDS

RS-1203 ASSEMBLY PAGE 24