Holmes HASF1750RC16 Operating Instructions, Adjustment Instructions, FAN Storage

OPERATING INSTRUCTIONS

Step 1: Set the fan on a dry level surface.

Step 2: Plug cord into any standard 120V AC outlet.

Step 3: To turn the fan on press the POWER button on the remote control or on the touch-key pad.

Step 4: The speed is adjustable by pushing either the speed but- ton on the remote control, or on the On/Speed button on the touch-key pad. Push this button fist for LOW, again for MEDIUM, and a third time for HIGH. Push a fourth time for repeat the sequence. To turn the fan OFF, push the OFF button on the remote control, or on the touch-key pad.

Step 5: To oscillate the fan head, push the button marked OSCILLATE on the remote, or OSCILLATE on the touch- key pad. Push a second time to stop oscillation.

Step 6: This fan is equipped with 4-setting stop timer. (1hr, 2hrs, 4 hrs, 8hrs) To activate the timer, push the TIMER button on the remote control, or the TIMER button on the touch-key pad. One push will set the 1 hr, the 2nd push sets the 2 hrs, the 3rd push sets the 4 hrs, and the 4th push sets the 8 hour timer. Push again to begin repeating this sequence.

Step 7: For a natural breeze movement, push the button marked Mode on the remote control or Mode on the touch-key pad. This will vary the fan speeds faster and slower. By pressing the Mode button a second time, you activate the SLEEP setting. This function slows the fan speed down, and when used in conjunction with the timer settings, will ultimately turn the fan off. Press the Mode button a 3rd time for BREEZE and SLEEP combined.

NOTE: Timer can be used in conjunction with several other functions. For example: Sleep + 4hr. TIMER causes the fan to gradually slow down over 4 hours and eventually turn off.

ADJUSTMENT INSTRUCTIONS

Height Adjustment

This fan is equipped with two poles, which allow you to adjust the height of the fan for three height settings.

Tilt Adjustment

Follow these instructions to tilt the fan head for upward angle air movement.

To change the tilting angle of the fan head, move the fan head to the desired angle.

CLEANING / MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for your Holmes stand fan. Please remember:

•Always unplug the fan before cleaning or disassembling.

•Do not allow water to drip on or into the fan motor housing.

•Do not use any of the following as a cleaner: gasoline, thinner, benzine

(See instructions for fan head assembly)

Step 1: To access the fan blade, remove the front grill and the fan blade nut.

Step 2: Clean the fan blade, both front and rear grills with a soft cloth moistened with a mild soap solution.

Step 3: Replace blade, tighten the fan blade nut, and securely fasten the front grill.

FAN STORAGE

Your fan can be stored in the off-season either partially disas- sembled or assembled. It is important to keep it in a safe, dry location.

•If stored disassembled, we recommend using the original (or appropriately sized) box.

•If stored assembled or partially assembled, remember to protect the fan head from dust.