P L E A S E R E A D A N D S AV E T H E S E
I M P O R TA N T S A F E T Y I N S T R U C T I O N S
F E AT U R E S - O P E R AT I O N S C L E A N I N G / M A I N T E N A N C E
C L E A N I N G / F A N S T O R A G E
When using electrical appliances, basic safety precautions should always be taken including the following:
1.Read all instructions before using this appliance.
2.Use fan only for purposes described in the instruction manual.
3.To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids. Plug the appliance directly into a 120V AC electrical outlet.
4.WARNING: To reduce the risk of fire or electrical shock, DO NOT use this fan with any
5.Close supervision is necessary when any appliance is used by or near children.
6.Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.
7.Avoid contact with moving parts.
8.DO NOT operate in the presence of explosives and/or flammable fumes.
9.To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
10.DO NOT operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner.
11.The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
12.DO NOT use outdoors.
13.DO NOT let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.
14.To disconnect, grip plug and pull from wall outlet. Never yank on cord.
15.Always use on a dry, level surface.
16.DO NOT operate fan until fully assembled with all parts properly in place.
17.This product is intended for household use only and not for commercial or industrial applications.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
Fig.1 ( Rear View) |
|
|
|
A | B | C | D |
A. Removable Grills |
| C. Fan Speed Control | |
B. Fan Blade |
|
| D. Grill Release Button |
INSTALLATION GUIDE
Window Fan Installation
Your window fan is designed to be used with a window screen in place. To install your window fan, simply position your fan on the edge of the window sill and close the window sash so that the window rests in the track on the top of the fan.
Intake/Exhaust
If you want to pull fresh air into your home, position your fan with the removable grills facing outside. Position your fan with the removable grills facing inside to exhaust the air out of your home.
OPERATING INSTRUCTIONS
Plug the fan into a 120V AC electrical outlet. Fan Speed Control (C) = Low, High, Off.
CLEANING/MAINTENANCE
INSTRUCTIONS
Follow these instructions to correctly and safely care for your fan.
• Always unplug the fan before cleaning or disassembling. | |
• | Be sure to clean your fan with a soft cloth moistened |
| with a mild soap solution. |
• | Do not allow water to drip on or enter into the fan |
Fig. 2 |
A |
D |
Fig. 3 |
B |
Fig. 4
FAN STORAGE
•Store your fan in the original box or an appropriately sized box.
•Protect the fan head from dust.
•Store your fan in a dry location.
If you have any questions regarding your product or would like to learn more about other Holmes® products, please contact our Consumer Service Department at
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
| housing. |
• | Do not use gasoline, thinner, or benzene as a cleaner. |
• | Lightly run a vacuum cleaner nozzle over the fan |
| grills to remove any dust or dirt that may have |
| accumulated. |
Fan Blade Cleaning
•Unplug the fan and remove the fan from the window.
•While pressing the grill release button, turn the fan grills
•Remove the grills. (See Fig. 3)
•Use a soft cloth moistened with a mild soap solution to clean the blades. (See Fig. 4)
•Place the grills back onto the fan and turn them clockwise until they click into place. Make sure the grills are secured prior to replacing the fan in your window and beginning operation.
