PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken including the following:

1.

 

Read all instructions before using this appliance.

 

 

 

 

2.

 

Use fan only for purposes described in the instruction manual.

 

 

3.

 

To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids

 

 

and plug the appliance directly into a 120V AC electrical outlet.

 

 

4.

 

Close supervision is necessary when any appliance is used by or near children.

 

 

5.

 

Unplug from outlet when not in use, when moving fan from one location to another, before putting

 

 

on or taking off parts and before cleaning.

 

 

 

 

6.

 

Avoid contact with moving parts.

 

 

 

 

7.

 

Do not operate in the presence of explosive and/or flammable fumes.

 

 

8.

 

To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or

 

 

other heating appliance.

 

 

 

 

 

9.

 

Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has

 

 

been dropped/damaged in any manner. Discard fan or return to an authorized service facility for

 

 

examination and/or repair.

 

 

 

 

10.

Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do

 

 

not route cord under furniture or appliances. Arrange cord away from traffic area and where it will

 

 

not be tripped over.

 

 

 

 

 

11.

The use of attachments not recommended or sold by the appliance manufacturer may cause

 

 

hazards.

 

 

 

 

 

12.

Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or

 

 

leave exposed to high traffic areas.

 

 

 

 

13.

Do not use outdoors.

 

 

 

 

 

14.

To disconnect, grip plug and pull from wall outlet. Never yank on cord.

 

 

15.

Always use on a dry, level surface.

 

 

 

 

16.

Do not operate fan until fully assembled with all parts properly in place.

 

 

17.

This product is intended for household use ONLY and not for commercial or industrial applications.

18.

WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window.

19.

WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state

 

 

speed control device.

 

 

 

 

 

20.

This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit

 

 

situation. If the fuse blows, unplug the product from the outlet. Replace the fuse

 

 

 

 

Figure 1

Tab Lock

 

 

as per the user servicing instructions (follow product marking for proper fuse

 

 

 

 

rating) and check the product. If the replacement fuse blows, a short circuit

 

 

Locking Tab

 

 

may be present and the product should be discarded or returned to an

 

 

 

 

 

 

 

 

 

authorized service facility for examination and/or repair.

 

 

 

 

ASSEMBLY INSTRUCTIONS

 

 

 

 

 

1.

 

Slide the two feet included in the box into the fan housing until the locking tabs

 

 

 

 

 

fit securely into the tab locks. Refer to Figure 1.

 

 

 

 

2.

 

Insert the plug end into the back of the fan as shown in Figure 2. Note the

 

 

 

 

 

orientation of the plug end to the opening in the back of the fan.

Figure 2

 

 

 

 

NOTE: The feet have been designed so that you may wrap the cord around them.

 

 

OPERATING INSTRUCTIONS

 

 

 

 

1.

 

Set fan on a dry, level surface.

 

 

 

 

2.

 

Please make sure the speed control is in the Off (O) position.

 

 

3.

 

Plug cord into any standard 120 volt AC outlet.

 

 

 

 

 

 

 

 

4.

 

The speed is adjustable by turning the speed control located on the back of the Fan to the desired

 

 

setting.

 

 

 

 

O: OFF

 

 

3: HIGH speed setting

2: MEDIUM speed setting

1: LOW speed setting

 

 

 

 

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the

 

 

 

other). To reduce the risk of electric shock, this plug is intended to fit in a

 

 

 

polarized outlet only one way. If the plug does not fit fully in the outlet,

 

 

 

reverse the plug. If it still does not fit, contact a qualified electrician to

 

 

 

install the proper outlet.

 

 

 

 

 

 

 

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY

 

 

 

 

FEATURE IN ANY WAY.

 

 

 

 

 

 

 

 

Owner’s Guide

HBF2010A/HBF2010C/HBF2001C/HBF2002A

REPLACEABLE FUSE

 

If your (2.5 Amp/5 Amp Max, 125 Volt) replaceable fuse blows, please order a new fuse at

1-800-546-5637. Follow the below instructions to replace the fuse on the plug.

Figure 3

User Servicing Instructions

Fuse

Fuse cover

1.

Unplug your fan. Grasp plug and remove from the receptacle or other outlet

 

 

device. Do not unplug by pulling on cord.

 

2.

Open fuse cover, located on the top of the plug, by using your thumb or a

Metal ends

 

flathead screwdriver to slide the cover down towards the prongs.

 

 

 

NOTE: Ensure that fuse cover is completely open before attempting to remove fuse.

3.

Remove fuse carefully by using a small screwdriver to pry the fuse out of the compartment by the

 

metal ends of the fuse. (see Figure 3)

 

4.

Place plug on a solid, flat surface. Insert new 2.5 Amp (5 Amp Max), 125 Volt fuse into fuse compartment

 

and use a small screwdriver to secure the metal ends of the fuse into the compartment.

 

 

CAUTION: Risk of fire. Replace fuse only with 2.5 Amp (5 Amp Max), 125 Volt fuse.

5.

Slide fuse cover closed completely. If fuse cover is difficult to close, make sure fuse is secured in place

 

completely by pressing down on metal ends of the fuse.

 

6.

Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be

 

removed. Discard product if the attachment plug is damaged.

 

FAN CLEANING

 

Always unplug the fan before cleaning.

 

Do not allow water to drip on or enter into fan housing.

 

Be sure to use a soft cloth moistened with a mild soap solution.

 

Do not use gasoline, paint thinner or benzene as a cleaner. You may also lightly run a vacuum

 

cleaner nozzle over the front grill to remove any dust or dirt.

 

Clean the fan grill and housing base with a soft, damp cloth. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water.

FAN BLADE CLEANING

To clean the fan blade remove the front grill by unscrewing the six screws located around the perimeter. DO NOT ATTEMPT TO REMOVE THE FAN BLADE. Clean with a soft, damp cloth. Ensure that the front grill is securely fastened to the fan prior to beginning operation.

FAN STORAGE

When storing your fan in the off season, it is important to keep it in a safe dry location. It is important to protect the fan head from dust. We strongly recommend using the original box from purchase.

If you have any questions regarding your product or would like to learn more about other Holmes® products, please contact our Consumer Service Department at 1-800-546-5637 or visit our website at www.holmesproducts.com.

1 YEAR LIMITED WARRANTY

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

If you have any questions regarding this warranty or would like to obtain warranty service, please call 1-800-546-5637 and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO NOT RETURN THIS

PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved.

Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.

Printed in the USA

Page 1
Image 1
Holmes HBF2001C important safety instructions Operating Instructions, Replaceable Fuse, FAN Cleaning, FAN Blade Cleaning

HBF2010A, HBF2010C, HBF2002A, HBF2001C specifications

The Holmes HBF2001C, HBF2002A, HBF2010C, and HBF2010A are a collection of innovative personal health scales designed to assist users in managing their weight and overall well-being. Each model presents a unique set of features, technologies, and characteristics that cater to different user needs while maintaining the brand’s commitment to accuracy and reliability.

Starting with the HBF2001C, this model offers an elegant design that complements any modern bathroom decor. It features a large LCD display, ensuring that users can easily read their weight measurements. One of the standout features of the HBF2001C is its memory function, which allows the scale to store data for multiple users. Thanks to this functionality, families can track their individual weight progress conveniently.

The HBF2002A takes the scale’s functionality a step further by incorporating bioelectrical impedance analysis (BIA) technology. This technology allows users to not only measure their weight but also gain insights into body fat percentage, muscle mass, and water levels. This holistic approach to health measurement makes the HBF2002A a popular choice among fitness enthusiasts who want to monitor their body composition.

The HBF2010C model emphasizes user-friendliness and a sleek design. It comes equipped with a convenient step-on activation feature, eliminating the need for manual activation. Like the HBF2001C, it also has a powerful memory function that can store data for up to four users, making it ideal for families or roommates. The standout feature here is the graphical display that illustrates weight trends over time, allowing users to visualize their progress effectively.

Finally, the HBF2010A mirrors many of the HBF2010C features but is enhanced with advanced connectivity options. This model can sync data with health apps via Bluetooth technology, allowing users to track their weight and body composition data over time on their smartphones. This integration is particularly beneficial for tech-savvy individuals who prefer to keep all their health information in one place.

Overall, the Holmes HBF series, including the HBF2001C, HBF2002A, HBF2010C, and HBF2010A, provides a comprehensive suite of scales aimed at promoting health and wellness. Each model offers distinct features tailored to various user preferences, from basic weight measurements to advanced body composition analysis and digital connectivity. With their emphasis on accuracy, functionality, and user experience, these scales are excellent tools for anyone looking to take charge of their health journey.