HoMedics BL-200 instruction manual Grounding Instructions, Figure a

•Use of this product should be pleasant and comfortable. Should pain or discomfort result, discontinue use and consult your physician.

•Never use while sleeping or drowsy.

•Always unplug the unit when filling or moving the unit.

•Ensure that your hands are dry when operating the controls or removing the plug.

•This product should NEVER be used by any individual suffering from any ailments that would limit the user’s capacity to operate the controls.

•This product should NEVER be used by any individual suffering from any ailments that would limit or altogether inhibit the user’s capacity to feel or have any sensation in the body part that the product is being used for.

•Consult your doctor before using this unit if you have diabetes, as diabetes can contribute to foot problems including decreased feeling or circulation to the feet. Given the existing risk of foot problems for diabetics, this unit must not be used prior to consulting your doctor.

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

6

Grounding Pin

Figure A

Tab for

Adapter Grounding Screw

Figure B

Grounded

Outlet

Figure C

Metal Screw

Figure D

Figure E

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is prop- erly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, you may temporarily use an adaptor (such as the one shown in Figure B) until you have a proper outlet (such as the one shown in Figure C) installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Figure A. A temporary adapter that looks like the adapter illustrated in Figure B may be used to connect this plug to a 2-pole receptacle as shown in Figure D if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet Figure C can be installed by a qualified electrician. The tab for grounding screw Figure B extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. See Figures D and E.

All servicing of this footbath must be performed by

authorized HoMedics service personnel.

7