HoMedics BPA-100 manual Press the User Select Button to choose User 1 or User

BPA-100IB_ENGSP.qxd 10/24/05 10:51 AM Page 19

1.Press the User Select Button to choose User 1 or User 2.

/ OR

After the user number is selected, press the START/STOP button to confirm the chosen user.

2.With the cuff wrapped around your arm, press the START/STOP button. Do not inflate the cuff unless it is wrapped around your arm. All digits will light up to check the display functions. The checking procedure will be completed after about 2 seconds.

START

STOP

3.After all symbols disappear, the display will show a blinking “0”. The monitor is “Ready to Measure” and will automatically inflate the cuff to start measurement.

Note: This monitor will re-inflate automatically if the system detects that your body requires more pressure for measurement.

4.When the measurement is completed, the cuff will deflate. Systolic pressure, diastolic pressure and pulse will be shown simultaneously on the

LCD screen. The measurement is then automatically stored into memory.

19 20