BPA-100IB_ENGSP.qxd 10/24/05 10:51 AM Page 11
INSTALLING BATTERIES
1.Press down on latch and lift the battery cover towards you to open the battery compartment.
2.Install or replace 4 “AA” sized batteries in the battery compartment according to the indications inside the compartment.
3.Replace the battery cover by clicking in the bottom hooks first, then push in the top end of the battery door.
Replace the batteries if:
1.The weak battery symbol appears on the display.
2.Nothing appears on the display when the power is switched on.
As the supplied batteries are for test only, they may be discharged earlier than batteries you buy in stores. Replace the batteries in pairs. Remove batteries when unit is not in use for extended periods of time.
Note: Batteries are hazardous waste. Do not dispose of them together with the household garbage.
USING AN AC ADAPTER (NOT INCLUDED)
This monitor is designed for operation with batteries or an optional AC adapter. Please use only a compatible, UL approved AC adapter with required voltage and current as indicated in this manual. Contact HoMedics Consumer Relations at
Note: • Please unload the batteries when operating with an AC adapter for an extended period of time. Leaving the batteries in the compartment for a long time may cause leakage, which may lead to damage of the unit.
•No batteries are needed when operating with an AC adapter.
Connect the AC adapter with the AC adapter jack in the back of the unit as shown below.
AC Adapter
Input: 120V 60Hz 15W
Output: 12V DC 600mA
Connect AC 
adapter here
11 | 12 |
