BPA-300-A.qxd 10/5/06 4:20 PM Page 9
DISPLAY EXPLANATIONS
Systolic
Pressure
Diastolic
Pressure
Date/Time Indicator | Pulse Rate |
Display Symbols:
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be replaced.
Pulse Symbol: Shows the pulse rate per minute.
Irregular Heartbeat Detector: Indicates an irregular heartbeat was detected. See page 22 for more information.
Memory Average: Displays average of last 3 readings
Risk Category Indicator: Compares readings against blood pressure guidelines. See page 21 for more information.
If any of the following letters and numbers appear in the area that diastolic pressure should be displayed, an error has occurred with your reading. See Troubleshooting section of this manual for more information.
Measurement Error: Measure again. Wrap the cuff correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear, then measure again.
Data Error: Remove and reload the batteries.
Recalibration Alert: Recalibration recommended. See page 26 for information.
9 | 10 |
