![](/images/new-backgrounds/1229627/22962719x1.webp)
3.When the measurement is completed, the cuff will deflate entirely and systolic pressure, diastolic pressure and pulse will be shown simultaneously on the LCD screen. The measurement is then automatically stored into memory.
Note:
1.This monitor automatically turns off approximately 1 minute after last operation. You may also press the START/ STOP button to turn the unit off.
2.To interrupt the measurement, you may press the START/STOP button (recommended) or
the Memory, or Date/Time Set ( ) buttons. The cuff will deflate immediately after a button is pressed.
RISK CATEGORY INDEX
This monitor comes equipped with a Risk Category Index that automatically compares each reading to criteria established by the U.S. National Institute of Health’s (NIH) National Heart Lung and Blood Institute as described earlier in this manual, and provides a helpful cue if your
17
reading falls into one of the stages that could potentially indicate increased risk. No cue is shown if the reading falls in the normal range as defined by NIH. Please note that cues provided by this monitor are only intended to assist you in using this table. The table and cues are only provided for convenience to have access to the NIH information. They are not a substitute for
a medical examination by your physician. It is important for you to consult with your physician regularly. Your physician will tell you your normal blood pressure range as well as the point at which you may actually be considered to be at risk.
(No Symbol)
RECALLING VALUES FROM MEMORY
1. Press the MEMORY button to access the
memory. | m | or |
| e | |
| M | y |
18
12/22/09 12:37 PM