INSTALLING BATTERIES
1.The battery cover is locat- ed along the left side of the monitor. Place thumb and index finger on top and bottom ridges.
2.Remove battery cover by pressing and pulling cover away from the monitor.
3.Install lower battery first according to the polarity indications inside the compartment. This bat- tery should be in the bottom position as shown in figure 3.
Battery Type: 2 Alkaline LR03 (AAA) size
4.Place in the other bat- tery, according to the polarity indications inside the compartment and as shown in figure 4.
1. |
2. |
3. |
4.
5. Replace the cover | 5. | |
by snapping it back | ||
| ||
into place. |
|
Replace the batteries if: 1. The weak battery
symbol appears in the display.
2.Nothing appears in the display when the power is switched on.
As the supplied batteries are for test only, they may be discharged earlier than batter- ies you buy in stores. Replace the batteries in pairs. Remove batteries when unit is not in use for extended periods of time.
Note: Batteries are hazardous waste. Do not dispose of them together with the household garbage.
13
14
